Export Ultra Gloss Liquid 2 Component Litte Stone Shady Path AB Coating&Painting

 Product Description       

Clear Liquid Epoxy Resin for Bonding Stone Pebble Marble to make Driveways and Pathway Floor

Features: 

1.Can cure at room temperature or heating curing,

2.Can automatic antifoaming

3.Can automatic leveling

4.Cured without ripples, no bubbles

5.Good transparency and excellent surface gloss

6.Can polish after drying 

7.After dry it is with high hardness as stones 

8.With high gloss like mirror

Application

M210 with its long work time,specially designed for constructions materials,to be mixed with sand,stone,pebbles,quartz,for garden roads,floor,swiming pools,walls,etc...

Properties before Hardening

How to DO           

MEASURING

With gloves on, pour equal amounts of resin and hardener into a mixing cup. And then pouring the mixture into another clean mixing cuo to make sure you are mixing it well.
TIP - Mix up a little more than you think you'll need because you want to completely cover your work in one shot and not have to mix more later.

MIXING

Stir really well for at least 3 minutes. Scrape the sides and the bottom to make sure you're being thorough (unmixed material will leave you with sticky spots that just won't cure). Once you put the resin and hardener together, you'll have about 40 minutes of working time before the resin thickens and cures.

POURING

After making sure your piece is level, go ahead and pour MagicResin over your work. Don't be scared! It'll start to level on its own, and you can spread it around into place. Let the resin run over the edges and then just use a brush to tidy it up. You'll notice bubbles will begin to rise to the surface. Many of these will pop on their own, but you can also pop them by torch.
TIP - Wooden panels work best for large pieces rather than canvas because they won't sag under the weight of the resin.

WAIT MagicResin needs to sit for several hours in a dust-free space while it cures. In about 8 hours it will be tacky but you will be able to pour a second coat if necessary. In about 12 hours it will be dry to the touch, and within 24 hours it will be 95% cured. It will be fully cured within 72 hours.CLEAN UP - To reuse your mixing tools, wipe them down with a paper towel before the resin dries.

Detailed Images
With our Epoxy Floor Coatingsystem, you get a whole range of additional Advantages including:

• Industrial Strength Epoxy 

•Waterproof Barrier, Against Moisture, Corrosion Inhibiting, Excellent Adhesion

•Designed for commercial, industrial, and residential concrete, cement, wood and tile Floor coating

•Warm, comfortable feel underfoot.

• Non-slip finish.

• Colour stability.

• Abrasion resistant.

• Seamless.

• Glossy, satin or mat surface.

• Light and weather resistant.

•High UV stability under normal daylight conditions.

• Reduced noise transfer providing quieter floors, reduces horizontal noise transmission.

• Hygienic floor finish, low dust retention, easy to clean, resilient surface.

• Light reflecting aesthetic floor finish.

• Available in over 150 RAL colors.

Package

 Warm prompt              

One:   what reason is glue occurrence does not stick and do not cure?

Answer:   this type of glue must be in accordance with its ratio, and it is the electronic weight ratio, not the volume ratio. Also, look at the temperature. If it's too cold, it's recommended to heat it up to 25 degrees before stirrig.

Second:  we do not have vacuum equipment, how to defoaming?  

Answer: dear, there is no vacuuming equipment no matter, our glue is natural defoaming, glue thoroughly after mixing, stationary 5-20 minutes, can automatically defoaming.

Three:  why is our glue seven days old and still not solidified?  

Answer: if the product is hard glue for 3 days and soft glue for 7 days and still does not cure, 1. Please check whether the ratio is based on weight; 2. 2. Whether the stirring method is correct or not. Considering environmental protection and safety, the curing agent is water-based, which is as thin as water. 3. If you can confirm that there is no problem with 1 and 2, then this is very important. The proportion of A component +B component of the primary glue should be more than 50 grams, and the proportion must be weighed by electrons.  

Four:  glue mix mix which component first pour?  

Answer: when mixing this product, please pour glue B into the blender, and then pour glue A.

Five:  I still don't understand what to do?

Answer: then please contact our customer service, we are ready to serve you 24 hours a day.